clear and grub specifications

What is clear and grub?

Clearing is defined as removing and disposing of all unwanted surface material, such as trees, brush, grass, weeds, downed trees, or other material. Grubbing is defined as removing and disposing of all unwanted vegetative matter from underground, such as stumps, roots, buried logs, or other debris.

What is clearing and grubbing in road construction?

Clearing and Grubbing of the Road Construction Area. Preparing the road right-of-way or construction area is referred to as clearing and grubbing. During the clearing phase, trees are felled. Grubbing refers to the clearing and removal of stumps and organic debris.

What is the definition of grubbing?

Grubbing or clearing denotes the removal of trees, shrubs, stumps, and rubbish from a site, often from the site on which a transportation or utility corridor, e. g. a road or power line; an edifice, e. g. a home or office; or a garden is to be constructed.

What does stripping mean in construction?

Description. The loss of bond between aggregates and asphalt binder that typically begins at the bottom of the HMA layer and progresses upward. When stripping begins at the surface and progresses downward it is usually called raveling. ... In general, some aggregates have an affinity for water over asphalt (hydrophilic).

How much does it cost to clear land on a house?

Clearing land and preparing a construction site to build a house will cost about $2,991 or between $1,281 and $4,756. This project averages $1.30 to $2 per square foot. Clearing heavily forested land ranges between $3,000 and $5,600 per acre while lightly wooded lots will only cost $500 to $2,000 per acre.

How do you clean underbrush by hand?

Clearing Underbrush. Cut down large underbrush with a pruning shear, chainsaw, or hatchet. Try to cut as close to the root of the brush as possible, but you may have to remove very large brush, such as bushes, in sections.

What is land clearing and stumping?

1. Removal of all vegetation at the ground level and moving and stacking them in windrows for burning so that roots are left to decay or to be removed at later dates. 2. Removal of all tree and stumps include roots, and moving and stacking them in windrows for subsequent burning.

What is clearing grading?

"Grade" means the vertical location of the ground surface. "Grading" means any excavating, filling or removal of the duff layer, or combination thereof. "Grading and clearing permit" means the permit required by this chapter for grading and clearing activities, including temporary permits.

What are the different methods of road construction?

In this article you will get all the answers and get to know the techniques used. The most common modes of construction are Earth road method, Gravel road, bituminous road; water bound macadam and concrete cement method. Earth road method.

What is grub slang for?

Grub is a slang term for food. ... Derived from it, is the adjective 'grubby' for somebody or something that is dirty and the Australian slang term 'grub' is also for a person who is unclean or who has messy habits. Example: Don't be such a grub. Wash your hands before you eat.

What is another word for grub?

In this page you can discover 49 synonyms, antonyms, idiomatic expressions, and related words for grub, like: caterpillar, dig, drudge, food, plod, victuals, comestibles, chow, delve, burrow and excavate.

Why do we call food grub?

The same root that produced grava, turned up in Old English grybban "to dig", which ultimately became grub. Because pigs and other animals usually grub for food, the word grub also became cowboy slang meaning "food". ... The Old English word for "ditch" was graef, which today is grave.

What stripping means?

verb (used with object), stripped or stript, strip·ping. to deprive of covering: to strip a fruit of its rind. to deprive of clothing; make bare or naked. to take away or remove: to strip sheets from the bed.

How soon can I strip concrete forms?

Walls and columns can be removed after about 24-48 hours. Slabs, with their props left under them, can typically be removed after 3-4 days. Soffits, with their props left under them, can be removed after one week. Props supporting slabs under 15 feet can be removed after one week.

What does stripping concrete mean?

On finished concrete, it leaves less of a mark than mechanical means. “We strip chemically whenever we don't want to change the concrete surface, say for an acid-stain project,” Jagger says. Chemical stripping is by far the most common method of removing a sealer to prepare concrete for resealing or refinishing.

Can you clear land yourself?

Once you've bought a plot of land, it is often necessary to clear the land before you can begin any building. In some cases, clearing land can be simple and nearly cost-free, especially if you have the right tools. In other cases, you may need to invest a lot of time and money to clear your chosen plot of land.

Is Cleared land worth more?

Land is a very valuable asset, especially in high-growth areas. By clearing your land, you make your property accessible and therefore more valuable. Land clearing will also be attractive to sellers as it will save them an extra step when they landscape their new property.

How do I clear my own land?

Land Clearing Techniques

Cut and Grind. The cut and grind technique is most suited for properties with a smaller amount of trees. ...
Pushover (Bulldozing) Pushover land clearing is exactly what it sounds like: you push over large growth with huge, expensive machinery. ...
Pullover. ...
Pile and Burn.

What is the best tool for clearing brush?

Best Tools for Clearing Brush

Chainsaw.
Stump Grinder.
String Trimmer/Weed Wacker.
Ax.
Shovel.
Bow Saw.
Tree Pruner.
Scythe/Machete.

What is underbrush clearing?

Underbrush clearing is a less intense version of land clearing, where brush is carefully removed rather than scraping the land down to the bare dirt beneath it. Underbrush clearing usually involves both mowing and hydro-axing.

What is the best equipment for land clearing?

For clearing most large areas overgrown land, a brush mower is your best bet. Choose a walk-behind (also known as 'self-propelled') model for walkable areas, and a tow-behind model (often called a 'brush hog') for really large fields and meadows.