stepping stone concrete

1. What kind of concrete do you use for Stepping Stones?
2. Can you use quikrete for Stepping Stones?
3. How thick should concrete stepping stones be?
4. What can I use for stepping stone molds?
5. What to put between stepping stones?
6. Is quikrete as strong as concrete?
7. How long does a stepping stone take to dry?
8. Can you spray paint concrete stepping stones?
9. Is it cheaper to make your own concrete pavers?
10. Is it cheaper to make your own concrete?
11. Can you just lay stepping stones on top of grass?
12. Should I use cement or concrete?
13. How do you keep stepping stones from sinking?
14. What is difference between concrete and cement?
15. Can I lay pavers on dirt?
16. How do you remove mold from Stepping Stones?
17. What kind of concrete do you use for molds?
18. What is the best material to put between flagstone?
19. What is the fastest growing ground cover?
20. What is the cheapest walkway material?

What kind of concrete do you use for Stepping Stones?

A good general-purpose sand-mix concrete is probably the best choice. An 80-pound bag should be enough to cast 5 to 6 stones, depending on their size. The texture is fine enough to allow you to embed decorative glass or pebbles, and it can easily accept imprints.

Can you use quikrete for Stepping Stones?

Use the Best Materials

You can purchase stepping stone kits at most craft stores, but if you're making more than one or two stepping stones, it's more economical to skip the kits and mix your own concrete. Some options include: 3 parts Quikrete Sand Topping Mix to 1 part Portland Cement. Quikrete Pro.

How thick should concrete stepping stones be?

Not only does each garden stepping stone have to "wait its turn" if there's only one mold, but you'll also have to mix separate batches of concrete. When searching for molds of a suitable size, remember that garden stepping stones should be about two inches thick and 16 to 18 inches wide.

What can I use for stepping stone molds?

Old cake or pie pans.

Metal cake or pie pans, coated with cooking spray or oil, or lined with plastic wrap, can be perfect molds for shaping concrete into stepping stones. Some users report that sprinkling sand on the bottom of the pans before pouring concrete helps the dried stone pop out of the mold.

What to put between stepping stones?

Here are a few suggestions.

1. Irish moss – Irish moss adds soft, spongy texture to paths in shady areas. ...
2. Elfin thyme – Elfin thyme is a miniature version of creeping thyme. ...
3. Dwarf mondo grass – Dwarf mondo grass is a good choice for full or partial shade, and it is one of the few plants you can grow near black walnuts.

Is quikrete as strong as concrete?

Quikrete fast setting concrete is just as strong as regular concrete. Concrete gets its strength from a chemical reaction that occurs over time during curing. After it's had time to cure, which usually take 28 days to complete, Quikrete can reach strengths up to 5000 psi.

How long does a stepping stone take to dry?

Although the concrete is dry when you remove the form, the stones need about two weeks to cure and harden thoroughly before you can step on them or place them in the yard. Consider curing them on a tarp or garbage bag.

Can you spray paint concrete stepping stones?

Give your concrete patio or path a mini facelift by adding a flagstone stepping-stone appearance. With spray paints meant for outdoors, you can make your concrete patio look entirely different in just a few hours.

Is it cheaper to make your own concrete pavers?

Total cost will be in favor of DIY as of the brake-even point of the molds and concrete, and getting nothing but cheaper per unit the more you make (assuming you never break the molds).

Is it cheaper to make your own concrete?

One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. ... Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.

Can you just lay stepping stones on top of grass?

Porcelain pavers can be laid directly over existing grass or lawn as 'stepping stones' or to create a pathway, but for better stability of the pavers, the grass beneath the pavers should first be removed, together with a shallow layer of the topsoil. Here's how to install pavers over grass for best results.

Should I use cement or concrete?

Concrete works well in larger projects, while cement is more often used in smaller jobs. One of the strongest and longest-lasting materials known to man, concrete is used to build schools, bridges, sidewalks, and countless other structures. But you don't need a hard hat to have success with concrete.

How do you keep stepping stones from sinking?

If you're using coarse sand, you may moisten it with a fine spray of water to help tamp it down and pack it tightly. This layer will keep the stone from sinking over a period of time.

What is difference between concrete and cement?

What is the difference between cement and concrete? Although the terms cement and concrete often are used interchangeably, cement is actually an ingredient of concrete. Concrete is a mixture of aggregates and paste. ... Cement comprises from 10 to 15 percent of the concrete mix, by volume.

Can I lay pavers on dirt?

While a permanent installation requires excavating soil and a compacted base of gravel and sand to ensure a long-lasting, level patio, you may only need the space for a season or two. A temporary installation of patio pavers on dirt may suffice until you're ready to install the hardscape in a long-range landscape plan.

How do you remove mold from Stepping Stones?

Coat the inside of your mold with petroleum jelly or nonstick cooking spray. This will make it easier to remove the stepping stone from the mold. If you are using a cardboard mold, cover the inside of the mold with a plastic sheet (ie: plastic wrap or a plastic bag) first.

What kind of concrete do you use for molds?

Place the QUIKRETE® Fiber-Reinforced Concrete, QUIKRETE® Sand Mix, or QUIKWALL® Surface Bonding Cement, or QUIKRETE® Quick-Setting Concrete in the mold. Be careful not to disturb the sand or move the rigid foam or wood strips. Smooth the surface of the concrete so that it is level with the upper edges of the sides.

What is the best material to put between flagstone?

Sand. Sand is often a traditional material used between the cracks of pavers depending on if it's irregular pavers or square ones and how close the gaps can be. The small granules will fill in the gaps between stones without leaving spaces.

What is the fastest growing ground cover?

16 Options for Fast Growing Ground Cover Plants

• Wild Thyme(Thymus serpyllum) ...
• Moss Phlox (Phlox subulata) ...
• Trailing Periwinkle(Vinca minor) ...
• Sweet Woodruff (Galium odoratum) ...
• Variegated Snow on the Mountain(Aegopodium podagraria) ...
• Aubrieta (Aubrieta deltoidea) ...
• Firecracker Sedum (Sedum) ...
• Dragon's Blood Sedum (Sedum)

What is the cheapest walkway material?

Mulch and gravel are the cheapest pathway materials you can buy for rock walkways, and they make construction simple, too, making them two of our favorite walkway ideas. All you have to do is remove the sod, roll out landscape fabric and spread the mulch or gravel.