zeolite garden bunnings

Is zeolite better than sand?

The main advantage of Zeolite over sand is that it produces a cleaner, safer, higher quality water. ... The removal of nutrients will also be beneficial as they are a common cause of bad taste in water. Zeolite is the only filter media that actually removes Ammonia from pool water and filters significantly finer than sand.

What is ZEO Clor?

Zeo Clor draws ammonia out of pool water and increases the efficiency of all other swimming pool chemicals. Zeo Clor has a considerably longer life in sand filters, requiring less frequent changes. When using Zeo Clor, only 85% of standard filter sand weight is required.

What is the best filter media for a swimming pool?

Glass Pearls are one of the most effective pool filter medias available today. Furthermore, glass extends the operation times and reduces the frequency of backwashing, saving you time and water (up to 20 per cent less water is used in the backwashing process).

What is the best pool filter sand?

Silica sand is the oldest of the filtering medias. Not all sand is created equal and if you are going to replace your old media with sand, silica sand is the way you need to go. Number 20 silica sand will filter down to 20 microns.

Can you mix zeolite with sand?

No mix and match.

How often do you replace zeolite?

If zeolite is recharged, it should be discarded after two to three months of use, and replaced with new zeolite.

How do I change the sand in my pool filter?

Remove the Multiport Valve. Remove the hoses or pipes that are connected to the multiport valve. ...
Cover the Standpipe. ...
Remove the Sand. ...
Rinse Out the Tank and Laterals. ...
Fill the Tank Halfway with Water. ...
Add the New Sand. ...
Fill the Tank and Reassemble the Connections. ...
Backwash and Rinse the Filter.

What is zeolite filter media?

Zeolite is a filter media used to remove ammonia from ponds and aquariums. It works much faster in removing ammonia than nitrifying bacteria and will help keep ammonia levels in check while the biological filter is being established. ... It is ideal for short term ammonia control or long term biological filtration.

How much does sand cost for pool filter?

Replacement sand for your sand filter typically costs around $25 per 50-pound bag, and your filter may require 100 to 600 pounds or more depending on the size and model. More than likely, you'll need about 350 pounds of sand for an average-sized inground pool filter.

Are filter balls better than sand?

Yes, Filtra Balls will clear the pool water much better than sand because they will trap much smaller particles. Filter sand will only trap debris that is 30-40 microns in size but Filtra Balls can filter out particles as small as 3 microns. ... You can clean Filtra Balls at any time using this recommended procedure: 1.

How often should you change out sand in pool filter?

When do I need to replace my sand? On average, sand should be replaced every 3-5 years. This may be longer if the pool stays clear, or shorter, if the filter runs all the time. The jagged edges of the sand wear down and become smooth as the sand ages.

Is ZeoSand better than silica sand?

The main benefit of standard silica pool sand is that it is much cheaper than ZeoSand. ... ZeoSand also lasts longer than sand so you won't need to refill your pool filter as often.

How many bags of sand do I need for a pool filter?

This is the type of sand your filter needs in order to properly clean your above ground pool. It is usually sold in 50lb bags and can be found in any pool store.
...
Sand Filter System – Sand Requirements.

Filter System	Sand Needed
Pentair SD40 Sand Filter	150 lbs
AquaPro 19" Sand Filter System	150 lbs

Can I use any sand in my pool filter?

It's a bad idea to use anything in your pool filter except sand specifically processed and sold for that purpose. Play sand simply won't keep your pool as clean as it should be.

How do you clean a sand pool filter?

In order for your sand filter to work optimally, it is important to clean the filter sand regularly.

Stop the pump.
Close the valves on the suction and return lines.
Open the cover of the pump and empty the filter basket.
Refit the cover.
Open the valve to the drain outlet.
Turn the lever to BACKWASH.

How much ZeoSand do I need?

Use 55 pounds of ZeoSand to replace 100 pounds of sand. ZeoSand is certified to NSF/ANSI Standard 61 Drinking Water Additives for health effects and is listed with WQA.

Why is pea gravel sometimes used in a high rate sand filter?

Fowler: When filling sand filters, be sure to use a mix of pea-gravel and sand. Having a layer of pea-gravel at the bottom gives nice spacing around the laterals so the water has an easy pathway. ... Clarifiers help to keep the filter operating more efficiently and the water cleaner.

How do you clean a zeolite pool filter?

Refreshing ZeoSand

Turn filter off. Drain filter.
Replace the drain plug. Refill with a 10% salt water solution (any type of salt will work). Use approximately 0.8 lb. of salt per gallon of water. ...
Let stand minimum of 2 hours.
Backwash to waste to clean filter media of all salt solution. Turn on filter. ZEOSAND. ZeoSand.

What does zeolite remove?

The most important property of zeolites is the removal of ammonia (NH₃) and ammonium (NH₄⁺). In aquaculture ammonia is very toxic for fish and small concentrations of it will already lead to diseases and inhibition of growth. In higher concentration ammonia can be lethal to fish.

Can zeolite be recharged?

Zeolite can be recharged by the use of ordinary table salt. Take a liter of 5% solution of Salt water and soak the zeolite in it for 24 hours. Then rinse afterwards. Salt will make zeolite release the absorbed ammonia back into the water.

How many times can zeolite be recharged?

Recharge in spring and every 6 weeks (unless poor water quality is detected). Replace 50% of the zeolite with every recharge. To recharge: prepare a salt solution (4 tablespoons per gallon of water) and soak the chunks for 24 hours.